Skip to content

NEW – Buy direct from our online store!

SnowWhite

SnowWhite

Highly Pigmented, Pre-blended Casting Epoxy for Opaque Whites

Starting at:
$471.96 USD
Starting at: $471.96 USD
$471.96 USD
Size: 15 L
Special Order

Please note that e-commerce sales are currently limited to the lower 48 contiguous states of the United States. Please visit your local retailer if you reside outside of this area.

Perfect for Casting

½” to 1 ½” Thick per Layer

Unique Pre-Blend

No Need to Measure Pigments

Ideal for Wood Projects

Compatible with Most Finishing Methods and Substrates

Consistent Color Match

Between Layers, Between Projects

One-of-a-kind, Pre-blended Casting Epoxy for Opaque Whites

SnowWhite uses a simple 2:1 mix ratio and is highly pigmented. It has been formulated for large casting applications, such as river tables or large furniture pieces. The high opacity, pure white color beautifully contrasts wood grain in live edge projects and allows the reclaimed wood to shine.

SnowWhite is intended for pours of 13-38 mm (0.5-1.5”) per layer, with a maximum pour volume of 16 L (without the use of additional cooling). SnowWhite can be worked using the same tools you have in your woodshop.

With our ever-growing line of EcoPoxy pigments and accessories, we can support you with everything you need for your epoxy projects.

Used to Create:

  • Custom Furniture
  • River Tables
  • Decorative Art Pieces
  • Other Large Casting Projects

Specifications

Pour Depth13-38mm (0.5-1.5”)
Mix Ratio by Volume (A:B)2:1
Mix Ratio by Mass (A:B)3.1:1
Working Time (in mold) 7 Hours*
Tacky to Touch 15 - 22 Hours*
Set to Touch 22 Hours*
Demolding Time 2 Days*
Time Finishing3 Days*
Full Cure 3 Days*
Working TemperatureResin, mold, and workspace temperatures should be 20-25°C (68-77°F)
Storage Temperature15-25°C (59-77°F)
Clean UpIsopropyl/Denatured Alcohol or Warm Soapy Water
Shelf LifeTwo years in unopened container, 3 months once opened

*Times based on a 38mm (1.5”) deep casting at a volume of 14L. Individual project times may vary depending on pour depth, volume, ambient temperature, and humidity.

View Technical Data Sheet

Mixing & Application Instructions

Mixing

Mix resin for 1 minute before adding hardener. Add hardener to resin pail and mix thoroughly for 4 to 5 minutes. For less than full kit mixing, a 2:1 by volume (3.1:1 by weight) mix ratio must be used. Always use hand and eye protection when working with or near epoxies.

Application

Working area should be clean, dry, and free of dust. SnowWhite can be poured at 13-38mm (0.5-1.5”) per layer. SnowWhite will not shrink while curing under normal conditions. However, it may slowly fill cracks and voids in live edge wood pieces, causing the resin level to drop. Be prepared to add more epoxy as needed.

Epoxy releases heat when curing. For pours of 16L or more, multiple thinner pours may be necessary to prevent overheating. Fans blowing across the curing epoxy may also be used to help dissipate heat. For best adhesion between layers, wait until the first layer is tacky to touch before pouring a second layer. If the previous layer is no longer tacky, sand with 220 grit sandpaper and wipe down before pouring another layer.

Additional Tips & Tricks

Visit our Tutorials section for articles & videos on best ways to use our products.

EcoPoxy Tutorials

Need help?

1 (855) 326-7699 info@ecopoxy.com

Safety Data Sheets

SnowWhite SDS Resin — English (CA)SnowWhite SDS Hardener — English (CA)
SnowWhite SDS Resin — English (US)SnowWhite SDS Hardener — English (US)
SnowWhite SDS Resin — French (CA)SnowWhite SDS Hardener — French (CA)
SnowWhite SDS Resin — Spanish (US)SnowWhite SDS Hardener — Spanish (US)

Premium SnowWhite Features

Perfect For Casting

With the ability to cast from ½” to 1½” thick pours, SnowWhite is perfect for river tables, ocean tables, and any other deep pour or large casting application.

Unique Pre-Blend

SnowWhite is the perfect solution if you are looking for a consistent opaque white color for your next project.

Ideal for Wood Projects

SnowWhite can be easily worked using the same tools you would use when woodworking. It can be sanded, shaped, drilled, tapped, machined, and routered.

Consistent Color Match

SnowWhite includes fillers and extra white pigments which are blended thoroughly, allowing for a uniform and incredibly vivid white finish - between pours, and between projects.

Goes Well With:

  • Epoxy Mold Release Tape

    Category: Accessories

    Up to 2X the Coverage Over the Standard Roll

    Our tape is translucent white, to offer a more accurate color visualization for when you do your next resin pour. At 72mm (2.8in), our tape is wide...

    View full details
    Starting at:
    $22.46 USD
    Starting at: $22.46 USD
    $22.46 USD
    Starting at:
    $22.46 USD
    Starting at: $22.46 USD
    $22.46 USD
    View Product

  • Canvas Apron

    Category: Accessories

    Work in Style & Comfort

    Our professional-grade apron is made from durable, hardwearing waxed canvas that stands up to spills and stains. It’s designed to comfortably fit a...

    View full details
    Starting at:
    $39.96 USD
    Starting at: $39.96 USD
    $39.96 USD
    Starting at:
    $39.96 USD
    Starting at: $39.96 USD
    $39.96 USD
    View Product

  • Pour Pail

    Category: Accessories

    The Ultimate Mixing, Pouring & Storage Pail

    Elevate your project workflow with the innovative EcoPoxy Pour Pail. The revolutionary handle design makes pouring easy and mess-free. Our custom p...

    View full details
    Starting at:
    $9.96 USD
    Starting at: $9.96 USD
    $9.96 USD
    Starting at:
    $9.96 USD
    Starting at: $9.96 USD
    $9.96 USD
    View Product

What will you create with SnowWhite?

Find our Products Here

Looking to purchase EcoPoxy for your next project? You can find EcoPoxy products at one of our many retailers worldwide.

Click Here